Product ID:HT 424 THIXOTROPIC PASTE,PART B,ADHESIVE
MSDS Date:07/17/1989
FSC:8040
NIIN:01-213-0565
Kit Part:Y
MSDS Number: BNWDQ

AMERICAN CYANAMID COMPANY

1 CYANAMID PLAZA
WAYNE, NJ 07470
US

Emergency Phone: 201-835-3100

Info Phone: 201-835-3100

Preparer: MARVIN FRIEDMAN

Cage: 70361

AMERICAN CYANAMID CO

CLIFTON, NJ 07015 US

Telephone: 973-683-2000

Cage: 70361

ALUMINUM.OSHA PEL FOR TOTAL DUST,5 MG(AL)/M3 RESP

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 68.5%

OSHA PEL 15 MG(AL)/M3

ACGIH TLV: 10 MG(AL)/M3

SILICA,AMORPHOUS.LD50 RAT ORAL >7.5 G/KG.LC50 RAT INHAL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 3.30%

OSHA PEL 6 MG/M3

ACGIH TLV: 0.2 MG/M3 RESP DUST

IN A WASTE DISPOSAL CONTAINER.FLUSH AREA W/

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50 RAT ORAL >5000 MG/KG, (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO VAPOR DURING HEAT
CURING MAY CAUSE INJURY OF THE RESPIRATORY TRACT.REPEATED AND
PROLONGED INHALATION OF ALUMINUM POWDER MAY CAUSE SERIOUS LUNG
DISORDERS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:VAPORS DURING HEAT CURING MAY CAUSE
IRRITATION.SKIN:ALLERGIC REACTION OR PRIMARY SKIN IRRITATION MAY BE
PRODUCED BY PROLONGED OR REPEATED DERMAL CONTACT WITH EPOXY
RESINS.INGESTION:N/K (FP A/ORNL ).INHALATION:OVEREXPOSURE DURING
HEAT CURING MAY CAUSE IRRITATION OF THE RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH WITH CLEAN WATER FOR A MINIMUM OF 15 MINUTES.SEEK
MEDICAL ATTENTION IMMEDIATELY .SKIN:IMMEDIATELY WASH AFFECTED AREAS
WITH SOAP AND PLENTY OF WATER.REMOVE CONTAMINATED CLOTHING AND SH
OES.OBTAIN MEDICAL ATTENTION.DO NOT REUSE CONTAMINATED CLOTHING
WITHOUT LAUNDERING.DESTROY OR THOROUGHLY CLEAN SHOES BEFORE
REUSE.INGESTION/INHALATION:N/K .

Extinguishing Media:USE WATER,CARBON DIOXIDE OR DRY CHEMICAL TO
EXTINGUISH FIRES.
Fire Fighting Procedures:WEAR SELF-CONTAINED,POSITIVE PRESSURE
BREATHING APPARATUS AND FULL FIREFIGHTING PROTECTIVE CLOTHING.SEE
EXPOS CONTROL METHODS FOR SPECIAL PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION OR COMBUSTION MAY
PRODUCE CARBON MONOXIDE,CARBON DIOXIDE,AMMONIA AND/OR OXIDES OF
NITROGEN.

Spill Release Procedures:WHERE EXPOS LEVEL IS NOT KNOWN,WEAR NIOSH
APPRVD,POSITIVE PRESS,SELF-CONTAINED RESP.WHERE EXPOS LEVEL IS
KNOWN,WEAR NIOSH APPRVD RESP SUITABLE FOR LEVEL OF EXPOS.WEAR SAME
PROT CLTHG/EQUIP AS IN EXPOS CONTROL METH.SWEEP UP SPILLS & PLACE
(SEE ING #3)
Neutralizing Agent:N/K

Handling and Storage Precautions:NONE.
Other Precautions:AVOID SKIN CONTACT.

Respiratory Protection:IF EXPOS BELOW PEL,NO RESP PROT REQ.IF EXPOS
EXCEEDS PEL,USE RESP APPRVD BY NIOSH FOR MATL & LEVEL OF EXPOS.A
FULL FACEPIECE RESP WILL PROVIDE EYE & FACE
PROT.CUTTING/GRINDING/SANDING OF PARTS FABRICA TED AFTER CURING OF
THIS MATL (SEE SUPP)
Ventilation:IF MATL IS NOT USED IN CLSD SYS,PROVIDE GOOD ENCLOSURE &
LOC EXHAUST VENT TO CONTROL EXPOS IF SPRAYING/CURING (SEE SUPP)
Protective Gloves:IMPERVIOUS.BARRIER CREAMS MAY BE USED.
Eye Protection:CHEMICAL SPLASH GOGGLES OR FACESHIELD.
Other Protective Equipment:APRON,WORKPANTS,LONG SLEEVE WORK SHIRT OR
DISPOS COVERALLS ARE RECOM TO PVNT SKIN CONTACT.EYEWASH EQUIP &
SFTY SHOWER.
Work Hygienic Practices:DO NOT CARRY,STORE OR CONSUME FOOD,BEVERAGE &
TOBACCO PROD WHERE THIS MATL IS IN USE.BEFORE EATING,DRINKING (SEE
ING #3)
Supplemental Safety and Health
LD50-LC50 MIX:LD50 RABBIT DERMAL >2000 MG/KG;LC50 RAT INHAL 5 MG/L/4
HR.VENT:AT ELEVATED TEMP.HYG PRACT:AND HANDS W/ SOAP & H*2O.RESP
PROT:MAY CREATE RESPIRABLE DUST PARTICLES.RESP PROT APPROP FOR THI
S DUST MAY BE REQ.REFER TO THE INGRED FOR POTENTIAL HAZ COMPONENTS
IN THE DUST.SEE "GUIDE TO INDUST RESP PROT (NIOSH)".

Decomp Temp:Decomp Text:N/K
Spec Gravity:1.9,WATER=1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE;ODORLESS.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR COMBUSTION
MAY PRODUCE CARBON MONOXIDE,CARBON DIOXIDE,AMMONIA AND/OR OXIDES OF
NITROGEN.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE W/ FEDERAL,STATE
& LOCAL REGULATIONS.COORDINATION W/ SUPPORTING INSTALLATION &/OR
MACOM ENVIRONMENTAL COORDINATION PRIOR TO DISPOSAL IS RECOMMENDED
TO DETERMINE APPROPRI ATE DISPOSAL METHODS .ALUMINUM:SARA LISTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.